« 熊本ミーティングに行ってきました | トップページ | 2005シーズン初滑り »

ホイール戻しました

わけあって16インチにしていたホイール/タイヤを17インチに戻しました。

DSC00813.jpg

やはり黄色のプントは黒っぽい色のホイールが似合うと思います・・・(・∀・)ニヤニヤ<自己満足

このホイール、重量が軽いおかげか、大径&扁平になってもほとんど乗り心地損なわれないです。ホイールバランスを取ってくれたカーショップの店長さんも「バランスウェイトほとんど要らなかったよ」と仰ってました。さすがMade in Japan?。プントだとリアフェンダーを加工したりと装着にはちょっと手間が必要なんで面倒ですが、4穴 PCD98 ハブ径58mmの数少ないホイールですので、アルファ、クーペフィアット乗りの方にはオススメできます。

|

« 熊本ミーティングに行ってきました | トップページ | 2005シーズン初滑り »

コメント

HELLO,
I am FIAT fans too,
My car is punto hgt abarth the same with you,
I have a question about your wheel,
I want to kwon what size of this wheel,
(EX my 4H PCD98 15" 6j ET(offset)37)
and what brand is it,
because I want install 17"wheel on my car,
So I very need your information,
THANK YOU VEARY MUCH,
We have a big new punto club in taiwan,
If you need any information,
we can do my best.

投稿: kubota | 2004/12/22 13:06

Hello, kubota san
Thank you for your comment.

My PUNTO wheel size is
4H PCD98 17" 7.5J ET35
with 10mm spacer(offset changer).
It is necessary to process a rear fender.

This wheel brand is `ASSO International'(http://www.asso.co.jp/) and is AlphaRomeo speciality.
I am sorry, it does not know whether to sell overseas.

Does your PUNTO fan club have a website? If it is, please let me know.

投稿: aradon | 2004/12/23 02:52

We(both me and kubota) are the members of New Punto Club(NPC) at Yahoo!TW.
This is our URL below.
http://tw.club.yahoo.com/clubs/NewPuntoClub/
Because of we discuss a lot here so that we don't have much photos.
You may not understand in Chinese but we can communicate with English.

And this is my web album
1.2004 Reunion of Fiat Fans Club
http://www.wretch.cc/album/album.php?id=jamespond&book=3

2.Small meeting of NPC
http://www.wretch.cc/album/album.php?id=jamespond&book=8

投稿: Jams007 | 2004/12/23 12:50

hello,thx for your answer.
My fiend jams is offer some information
about our club,
I will take some picture about my car tunning and offer more information for
you on this weekend,
About wheel
why didn't you order this size,
that 4H PCD98 17" 7.5J ET27
becurse ET35+10mm spacer=ET25
Can you tell me It's ok ?
and do you have any size problem,
when you install 17"wheel ?
thank you!!
PS.I can order this wheel in taiwan,
but I can'nt return ,
So I must very assurance SIZE,
THANK YOUR HELP !!!

投稿: kubota | 2004/12/23 15:19

Hello.
Thank you for URL of your club.
Taiwan has much great PUNTO owner!

In Japan, My wheel(ASSO Partire) can choose only +35 offset.
Therefore, it has changed into +25 using 10mm spacer.

There are cautions.
A front tire house(= inner of fender) is a margin.
However, a rear tire house is no margin.
You have to cut or bend of a rear fender edge.

When having equipped with the wheel of a SPEEDLINE(16" 7J ET27) before, it hit on the rear fender and shoulder of tire.
I think it required to cut or bend of a rear fender edge.

投稿: aradon | 2004/12/24 00:32

Hello,thank you for your help.
I am gathering some information of my car,and i will post it on your web recently.
My plan about wheel, including front brake system
(BREMBO 4 pot + REDDOT brake disc 305mm)
It will carry out after Chinese New Year.
by the way, Merry X'mas and what could i call you?(because i cannot understand Japanese)
Keep in contact^^

投稿: | 2004/12/25 02:36

Hello. I'm sorry. It went back to My hometown.

BREMBO is very good!
My PUNTO brake system is normal, it sees it like the bicycle in 17 inches.
BREMBO brake system installed photograph is waited for.

投稿: aradon | 2005/01/05 15:09

コメントを書く



(ウェブ上には掲載しません)




トラックバック

この記事のトラックバックURL:
http://app.cocolog-nifty.com/t/trackback/36409/2050621

この記事へのトラックバック一覧です: ホイール戻しました:

« 熊本ミーティングに行ってきました | トップページ | 2005シーズン初滑り »